PURSUIT S428 SPORT, Owner'S Manual

Page: 192 / 196

Aquatic Invasive Species
H-2
GENERAL CLEAN DRAIN DRY PROCEDURE
Clean, Drain, Dry… In every waterbody, every time.
Preventing the spread of aquatic invasive species starts with you. A cooperative effort is necessary by all
persons and agencies involved with recreational activities to achieve the best results and protect our
aquatic resources and recreational opportunities. The general Clean Drain Dry procedure is described
below:
CLEAN
Clean off visible aquatic plants, animals, and mud from all equipment before leaving water access.
Inspect and clean motor or engine, including the lower unit and motor mounts; trailer, including axles,
bunks, and rollers; anchors; dock lines; and equipment before leaving the water body.
•
Rinse equipment and boat hulls (with high pressure, hot water when possible)
•
Rinse interior compartments of boats with low pressure, hot water (120°F) for a minimum of
130 seconds contact time.
•
Flush motor with hot water (120°F) for 2 minutes (or according to owner’s manual)
DRAIN
Drain the motor, motor cooling system, bilge, live well, fish box, and other water containing devices
before leaving water access.
DRY
Allow the boat to completely dry OR wipe with a towel before reuse, before visiting any other bodies of
water. For ANGLERS, the additional step of DISPOSE is recommended.
Bilge
Anchor
Livewell &
Fish Boxes
Dock Lines
Motors
Trailer Lights
Axles
Hull
Trailer
Ladder
Hitch
Rollers & Bunks
Hull Side Door