PURSUIT 3070 Conter Console Owner'S Manual Download Page 102

Page: 102 / 126

C 300

102

12.3 Recommissioning

DO NOT OPERATE THE BOAT UNLESS IT IS COMPLETELY ASSEMBLED. KEEP ALL
FASTENERS TIGHT. KEEP ADJUSTMENTS ACCORDING TO SPECIFICATIONS.

BEFORE LAUNCHING THE BOAT, MAKE SURE THE HULL DRAIN PLUG IS INSTALLED.

REACTIVATING THE BOAT AFTER STORAGE:

•

Charge and install the batteries.

•

Install the drain plug in the hull.

•

Check the engines for damage and follow the manufacturer’s instructions for recommissioning.

•

Check the engine's mounting bolts to make sure they are tight.

•

Perform all routine maintenance.

•

Check all hose clamps for tightness.

•

Pump the antifreeze from the fresh and raw water systems and flush several times with fresh water. Make
sure all antifreeze is flushed from the water heater and it is filled with fresh water before it is activated.

•

Check and lubricate the steering system.

•

Clean and wash the boat.

•

Install all upholstery, cushions and canvas.

Summary of Contents for 3070 Conter Console































































































































Search results

Summary of Contents for 3070 Conter Console

Reviews:

Related manuals for 3070 Conter Console

Brands by name

Popular brands

PURSUIT 3070 Conter Console, Owner'S Manual

Search results

Summary of Contents for 3070 Conter Console

Reviews:

Related manuals for 3070 Conter Console

Brands by name

Popular brands