background image

  

DISCLAIMER

When 

Kojack Hydra Jack 

and its Components

 

are maintained and used correctly 

they are an effective and simple means to raise a vehicle. However, Purple 

Line  will  not  warrant  or  accept  any  liability  for  improper  fitment,  use  or  misuse, 
lack  of  maintenance  and  unauthorised  modification  or  repair  of  the 

Kojack 

IMPORTANT NOTICE:

When replacing or topping up hydraulic fluid use a high grade hydraulic fluid ISO10-

15 or equivalent. Do not use brake fluid, alcohol, glycerin, detergent, motor oil or any 

other fluid perceived or claimed suitable, as the use of fluids other than the hydraulic 

fluid recommended will cause serious damage to the internal components rendering 

it the jack in-operative.

TO ADD HYDRAULIC FLUID:

Open the Release Valve by turning it anti-clockwise and depress the Hydraulic Ram 

as far as it will go. Place the jack on its side horizontally with the Oil Filler Cap facing 

upwards  and  remove  the  cap.  Fill  with  the  recommended  hydraulic  fluid  until  the 

fluid is level with the filler aperture. Prevent any contaminants from mixing with the 

hydraulic fluid and entering the jack. Replace Oil Filler Cap.

TO CHANGE HYDRAULIC FLUID:

Hydraulic Fluid should be changed every twelve months to maintain the jack in peak  

performance. To replace the hydraulic fluid remove the Oil Filler Cap, place the jack 

on its side over a tray or bowl with the oil filler aperture facing downwards and allow 

the fluid to drain. This may take some time as air must enter to allow the fluid to drain. 

Dispose of the old hydraulic fluid according to any government regulations that ap

-

ply. (Note hydraulic fluid is toxic to the environment). Once drained fill the jack with 

hydraulic fluid as per the instruction on how ‘to add hydraulic fluid’

LUBRICATION: 

It is prudent to lubricate all pivoting joints on the jack every three months with a light 

oil.

PREVENTING RUST:

Check the Hydraulic Ram every three months for signs of corrosion If apparent clean 

with an oily rag until removed. To minimise corrosion ensure the Hydraulic Ram is 

inserted all the way in the jack when not in use.

GENERAL CARE AND MAINTENANCE:

Do not totally unscrew or remove the Release Valve.  

  

MAINTENANCE

MANUAL Hydra Jack - RV Jacking Kit 4000kgs.indd   7

23/07/2013   12:44:04 PM

“More information https://www.caravansplus.com.au"

Summary of Contents for kojack 46HJ-RV4T









Reviews: