Puricom VYRTA direct flow, User Manual, Page: 18 / 32

Data sheet
Flow sensor.
Input control by solenoid valve.
Flushing solenoid valve
Minimum pressure switch.
Electronic leak sensor.
Water quality control.
Maintenance notice.
249 x 250 x 461.
12,45.
3/8”.
1/4”.
1/4”.
3/8” M-F. *****
Tube clamp
40 mm drain.
1. TECHNICAL CHARACTERISTICS
APPLICATION
Water treatment
Reverse osmosis
Use
Improvement of the characteristics of drinking water (which complies with the requirements of the European Di-
rective on water for human consumption 98/83 or its national transpositions in the different member states of the
European Community).
Modifications by reduction or contribution
• Water treatment by reverse osmosis is able to reduce concentrations of salts and other substances in high per-
centages.
• Minimum reduction* of certain compounds and parameters:
Sodium: 90%.
Calcium: 90%.
Sulfate: 90%.
Chloride: 90%.
Total hardness: 90%.
Conductivity: 90%.
* Depending on the characteristics of the water to be treated (at the outlet of the membrane). These values may vary
depending on the type of post-filter that incorporates the equipment and / or regulation of the mixing valve (in case
it is included).
OPERATING LIMITS
EQUIPO CON BOMBA
Pressure (max./min.): 4 bar - 1 bar (400kPa-100kPa).
TDS (max.): 1500ppm.
Temperature (max./min.): 38 ºC - 5 ºC.
Hardness (max.): 15 ºHF. **
Type of control:
Security system:
Dimensions (W x B x C in mm):
Weight (in kg, including all accesses):
Input connection:
Drain connection:
Tap connection:
Wall adapter:
Drain collar:
A
B
C
1. Entrance
2. Osmotic water
3. Drainage
4. Electronic faucet
5. Food
1 2 3 4 5
TECHNICAL SHEET
FOR REVERSE OSMOSIS EQUIPMENT