User Manual
PT-PMS-62S
41
8.2.7
Relay Control
Command
Description
Feedback Example
Relay ON[X].
Turn on relay [X], X=1~2.
Relay 1 ON
Relay OFF[X].
Turn off relay [X], X=1~2.
Relay 1 OFF
Relay
AutomationCtl:[X],[Y].
Set the auto stop time of relay [X] to Y
seconds. X=1~2, Y=0~20.
Relay 1 Turn On, delay 0.0
seconds turn off
ToggleRelay[X].
Toggle relay [X], X=1~2.
8.2.8
VGA Output Image Adjustment
When VGA source is selected, the below commands can be used to adjust the output
picture.
Command
Description
Feedback Example
SetVGAPhase:XX.
Set the phase position to XX.
XX=0~100.
SetVGAAutoSync: AutoSync OFF
SetVGABrightness: XX.
Set the brightness to XX. XX=0~100.
SetVGABrightness: 070
SetVGAContrast: XX.
Set the contrast to XX. XX=0~100.
SetVGAContrast: 050
SetVGAColor: XX.
Set the color to XX. XX=0~100.
SetVGAColor: 020
SetVGAAutoSync:X.
X=0, Disable Auto-Sync mode.
X=1, Enable Auto-Sync mode.
SetVGAAutoSync: AutoSync
OFF/ON
SetVGASharpness:XX.
Set the sharpness to XX. XX=0~100.
SetVGASharpness: 050
SetVGAColorTemp:X.
Auto-adjust the color temperature to
X. X=0~3 (Normal/Cool/Warm)
SetVGAColorTemp: COLORTEMP
WARM SetVGAColorTemp:
COLORTEMP MEDIUM
SetVGAColorTemp: COLORTEMP
COOL SetVGAColorTemp:
COLORTEMP USER
SetVGAAspetRatio:X.
Set the aspect ratio to X. X=0~2 (16:9/
4:3/auto)
SetVGAAspetRatio:AspetRatio
16X9
SetVGAAspetRatio:AspetRatio
4X3
SetVGAAspetRatio:AspetRatio
Auto
