User Manual
PT-HDBT-703-TXWP
15
EDID:1920x1200, PCM 2CH
6CH
EDID:3840x2160@60, 4:2:0
8BIT
EDID: USER
EDID: BYPASS
6.3.4
CEC Control
The switcher also supports sending of a few common CEC commands using RS232
command code. Specific CEC command can also be sent from the switcher. The RS232
commands are as given in the following table. Please note that only CEC enabled
devices that have the specified logical address will respond to CEC commands.
Command
Function
Feedback Example
50730%
Volume up.
CEC VOLUME INCREASE
50731%
Volume down.
CEC VOLUME DECREASE
50732%
Volume mute toggle.
CEC VOLUME MUTE
50733%
Display on.
CEC DISPLAY ON
50734%
Display off.
CEC DISPLAY OFF
CEC
<xx:xx:xx....>
Send CEC command “xx:xx:xx…” to
control display device.
CEC <xx:xx:xx…>
Summary of Contents for PT-HDBT-703-TXWP
Page 26: ...User Manual PT HDBT 703 TXWP ...
Page 27: ...User Manual PT HDBT 703 TXWP ...
