User Manual
PT-HDBT-703-TXWP
5
⑨
LINK LED:
The LED illuminates green to indicate a successful data link with the
HDBaseT receiver.
3.2
Rear Panel
①
HDBT (POC):
RJ45 HDBaseT output port to connect to the HDBT IN port of the
receiver by a CATx cable. It supports 12V-48V PoC to enable the switcher can be
powered from a compatible receiver.
②
RS232:
Either 3-pin terminal block to connect a control device (such as PC) to
send the RS232 command to control this unit, or to connect a third party device
which needs to be controlled by RS232 pass-through. For more details, please
refer to the
on the page 10.
③
DC IN:
Power port to connect 24V DC power adapter.
④
IR IN:
3-pin terminal block to connect an IR receiver.
1
2 3 4
Summary of Contents for PT-HDBT-703-TXWP
Page 26: ...User Manual PT HDBT 703 TXWP ...
Page 27: ...User Manual PT HDBT 703 TXWP ...
