© 2019 GOJO Industries, Inc. All Rights Reserved
Page
1
of
6
PURELL
®
ONVATION 8 Series PAN Module Setup and Validation
Objectives
You will learn how to perform the following system setup procedures:
•
Recording required MAC ID of PURELL PAN Module
•
Installing PAN Module into 8 Series Dispenser
•
Provisioning the PAN Module to the ONVATION Hub
•
Validating PAN Module connectivity
•
Troubleshooting setup issues
Equipment
•
PURELL ONVATION 8 Series PAN Modules
•
Recording device for MAC ID
•
ONVATION Installer App
Module MAC I D Ide ntification and Rec ording
Step
Illustration
1. Open module static bag and record MAC ID onto
recorder with association to dispenser location.
2. Record Dispenser location on the static bag.
3. Using recorded MAC ID’s enter them into the
ONVATION Installer App.
4. Install the Dispenser per the Dispenser
Installation Guidelines.
