User Manual
IPAV Pro Series
44
5.7
Analog Audio Routing Tab
The "Analog Audio" tab is used to setup and manage analog audio routing between TX
and RX devices.
All the RX devices are listed in the top half of the Receiver (RX) section. Similarly, all
the TX devices are listed in the bottom half in the Transmitter (TX) section.
First, verify if appropriate TX and RX devices are joined:
1)
Verify, if the Receiver (RX) is currently joined with the desired Transmitter (TX).
a)
Click on the RX and the Transmitter (TX) it is joined to will be highlighted blue.
b)
Selecting the respective transmitter will highlight all the receivers joined to
the same TX.
2)
If the respective Transmitter (TX) is currently not joined to the Receiver (RX), join
them together:
a)
In the Transmitter (TX) section, select a TX by left-clicking on its associated
