User Manual
IPAV Pro Series
25
4.
System Connection
4.1
Usage Precaution
Make sure all components and accessories are included before installation.
The system should be installed in a clean environment with proper temperature
and humidity.
All of the power switches, plugs, sockets, and power cords should be insulated
and safe.
All devices should be connected before being powered on.
4.2
System Connection
There are five types of possible applications:
Extender (Point-to-Point)
In a point-to-point configuration, there is no need for a switch. Distribute full,
uncompressed data up to 4K@60Hz 4:4:4 resolution as well as 1G Ethernet, audio
and control signals over a single copper or fiber cable.
Splitter (One-to-Many)
With only one IPAV transmitter and one 10G Ethernet
s
witch, any A/V signal can be
flawlessly and instantly distributed to a near limitless number of receivers and
screens, any number of times.
Matrix Switcher (Many-to-One, Many-to-Many)
The combination of switching and splitting enables a completely scalable matrix
system. Independently route video, audio and RS232 control signal from any source
to any endpoint. The IPAV Pro allows for on-the-fly upgrading and a virtually
unlimited number of I/O ports.
