3
HOW TO ADD SALT
When adding salt to the pool, it is best to pour the required salt into the shallow end of the pool
and run the filter and pump at the same time to circulate the water and dissolve the salt.
Do not pour the salt bag into the water because the chemicals and ink on the bag will disturb
water balance.
During the summer, salt may take 24-48 hours for salt to dissolve, while in winter it takes longer.
Fine grain salt will dissolve faster than compressed tablets.
Do not add salt directly to the skimmer or directly onto the main drain. Due to high concentration
of salt and reduced flow to the pump, this will shut down or shorten the life of the cell.
If salt is added incorrectly, turn off CMARSHA immediately for 24 hours while the pump and filter
are still running. This will help distribute the salt evenly. The salt display may take 24 hours to
respond to the change in salt concentration.
WARNING:
Do not use salt with Phosphates
