9
2) In a separate bucket, mix one part of muriatic acid with four parts of water. Pour this acid
solution directly to cell. Make sure that the cleaning water completely covers the components
inside the cell.
3) Wait for the foaming to stop. Let the solution soak for no more than fifteen minutes.
4) Properly dispose of the acid solution, and use a hose to wash away the remaining debris from
the pool.
5) Look inside the unit and check if there is no debris or scale residue. If necessary, repeat steps
2-4.
6) Re install the cell into the PVC return pipe.
Note: If you do not currently have a cleaning cap or cleaning rack, you can fully immerse the cell
in a five-gallon bucket.
ALWAYS POUR ACID INTO WATER-NEVER POUR WATER INTO ACID.
BE SURE TO WEAR PROTECTIVE GLASSES, CLOTHING, AND CHEMICAL RESISTANT
GLOVES.
