4
5
TECHNICAL SPECIFICATIONS OF
PUREIT AdvANCEd RO + MF / RO + Uv
*
PURIFIER
#
PUREIT AdvANCEd RO + MF / RO + Uv
*
UNIqUE TECHNOLOGY
**
Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS,
pressure and life of filter elements.
***
Input water quality and TDS content are important determinants of output water quality.
****
If input pressure exceeds 30 PSI, please install a company-provided Pressure Reducing Valve at an additional cost.
If the pressure is lesser than 5 PSI than you need to buy a Pressure Enhancing Pump at an additional cost.
#
Technical specifications are subject to change or improvement without prior notice.
##
Only in Advanced RO + MF.
RO Membrane
Removes dissolved salts, hardness, pesticides
and heavy metals like arsenic, lead and mercury.
It also removes microbial contaminants like
bacteria, virus, protozoa and cysts.
Micro Filtration (MF) Membrane /
Ultraviolet (Uv) Chamber
*
Micro Filtration (MF) / UV Chamber added
Post-RO, which ensures that the water is purified
not once, but twice.
Post-RO Carbon Filter
Last level of purification acts as a polisher and
enhances the taste of purified water.
4
5
6
Pre-Sediment Filter
Removes fine and coarse particulate
impurities/dirt and improves the life of
the carbon filter.
Pre-RO Carbon Filter
Removes chlorine and organic
impurities like harmful pesticides. It also
adsorbs bad taste and odour causing
organic compounds from water.
Post-Carbon Sediment Filter
Removes remaining fine and coarse
particulate impurities/dirt and improves
the life of RO Membrane.
1
2
3
Pureit Advanced RO + MF / RO + UV* Purifier
Height
422.6 mm
Width
380 mm
Depth
165.6 mm
Weight of Pureit Advanced RO + MF / RO + UV
*
~ 5.8 kg–(dry weight)
Flow Rate
**
Approximately 9–12 litres per hour
Storage Tank Capacity
5 litres
6-stage Purifying Technology
PP Melt Blown Pre-Sediment Filter, Pre-RO Carbon Filter, Post-Carbon Sediment
Filter, Reverse Osmosis Membrane, Micro Filtration / UV Chamber and Post-RO
Carbon Filter
Membrane Type
Thin film composite spiral wound
Pump Type
Diaphragm pump, 24 V dc
% Recovery
**
Typically 20–25%
TDS Reduction
***
90% (min)
Power Rating
Advanced RO + MF - 36 Watts / Advanced RO + UV - 55 Watts
Pressure Rating
5–30 PSI****
Rated Voltage (Operating Voltage)
165 - 240 V ac; 50 Hz
Material of Construction for Plastic Parts
Food safe, non-toxic, engineering-grade plastics
Length of Power Adaptor
1.5 metre
Total Dissolved Solids
200 mg/lit (min) – 1800 mg/lit (max)
Total Hardness
600 mg/lit (max)
Iron
0.3 mg/lit (max)
Turbidity
1
NTU (max)
SPECIFICATIONS OF PUREIT GERMKILL KIT
™
Germkill Kit
™
Material of Construction
Food safe, non-toxic, engineering-grade plastics
Pre-Sediment Filter
Pre-Sediment Filter –
1
No
GKK-1
Pre-Sediment Filter – 2 Nos
Pre-RO Carbon Filter –
1
No
Post-RO Carbon Filter –
1
No
GKK-2
Pre-Sediment Filter – 2 Nos
Pre-RO Carbon Filter –
1
No
Post-RO Carbon Filter –
1
No
Post-Carbon Sediment Filter –
1
No
RO Membrane –
1
No
Micro Filtration Membrane –
1
No
##
Germkill Performance Standard
Meets stringent international criteria for microbiologically
safe drinking water – e.g., Environmental Protection Agency (EPA), USA
Reject Water
5
4
3
2
1
6
Summary of Contents for Advanced RO plus MF
Page 2: ......