PUREGAS, LLC
P200W Series Dehydrator User’s Guide
Page 7 of 82
P012026 – Rev. F
IMPORTANT!
Removing the cover or performing procedures not described in this
User’s Guide WILL VOID THE WARRANTY.
CAUTION!
Incoming power to Dehydrator must be:
•
10 amp service recommended
•
24 VDC for P200W model (7 Amp slow blow fuse)
•
48 VDC for P208W model (7 amp slow blow fuse)
•
85 - 264 VAC, 1 Phase for P200WA model
(5 amp slow blow fuse)
CAUTION!
Proper Installation as outlined in this User’s Guide is extremely
important to ensure the reliability and longevity of the equipment as
well as prevent damage or personal injury.
CAUTION!
Using the internal pressure relief valve equipped with this unit as
the only means of over pressurization protection for the connected
system is not advised.