PUREGAS, LLC
P200W Series Dehydrator User’s Guide
Page 62 of 82
P012026 – Rev. F
9. Testing Your Dehydrator
9.1 Safety & Warning Information
WARNING!
For your safety, all the information in this User’s Guide must
be followed to minimize the risk of electrical shock, and prevent
property damage or personal injury.
WARNING!
Extreme care should be exercised to avoid contact with live
electrical circuits.
Many procedures performed during
installation, operation, and testing of this Dehydrator require the
equipment to be running, creating a situation for potential electrical
shock. It is highly recommended that you remove all jewelry
before performing any procedures.
IMPORTANT!
Removing the cover or performing procedures not described in this
User’s Guide WILL VOID THE WARRANTY.
CAUTION!
Incoming power to Dehydrator must be:
•
10 amp service recommended
•
24 VDC for P200W model (7 Amp slow blow fuse)
•
48 VDC for P208W model (7 amp slow blow fuse)
•
85 - 264 VAC, 1 Phase for P200WA model
(5 amp slow blow fuse)
