8
CustomerService
@
GQBrands.com
GQBrands.com
1-866-498-5269
ASSEMBLY INSTRUCTIONS
STEP 2
:
Locate:
x1 Step (Part 7)
Slide the Step (Part 7) from the top of the
Poles until it reaches and aligns to the
bottom openings.
NOTE:
Make sure that the top part of the Step
is facing upwards. It will be made up of a
geometric pattern and be completely flat.
STEP 3
:
Locate:
x2 60mm Screw (Part 1)
x2 Screw Nut (Part 2)
A. Slide x1 Screw Nut (Part 2) on the back
of the Step (Part 7), it will fit perfectly.
B. Align all openings from the Step & Pole.
Insert x1 60mm Screw (Part 1) and
tighten with a Phillips Screwdriver.
Hold on to the Screw Nut on the opposite
side to avoid that it falls as you tighten
the Screw.
