Instruction Manual
6007FLB
Low Profile Full Size Air Bed
with Flock Top
74” x 53” x 9”
*inflated size may vary
Thank you for purchasing a Pure Comfort product. Please read the care, use, and warnings included in this manual in their entirety before inflating or using your air mattress.
Always follow these instructions to prolong the life of your air bed and to ensure you have a safe and comfortable experience. Keep this manual with your air mattress for future
reference and ensure that guests and others have read this material and understand these instructions before using.
WARNINGS - GENERAL SAFETY INFORMATION
DO NOT DISCARD THIS SHEET - READ AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE INFLATING OR USING THIS PRODUCT.
WARNING:
This is an electrical product - the air mattress pump is not a toy. To avoid risk of fire, burns, injury or shock:
- PUMP REQUIRES FOUR (4) “D” BATTERIES. BATTERIES NOT INCLUDED.
- Remove batteries from the pump before storing. Never mix old and new batteries or battery types.
- Supervision is required when this product is in use by or near children, invalids and/or disabled persons.
- Never leave the pump unattended while in use, inflating or deflating the mattress. If you notice any unusual performance (noise, vibration, burning
smells, etc.) turn off the pump and remove it from its housing immediately. Obtain protective eye cover, open battery door and remove batteries. Do not
touch any liquid inside the battery compartment if present, and ensure the batteries are not hot to the touch before grasping.
- This pump is only intended to inflate this specific mattress. Never use this product in any manner other than its intended use as described in these
instructions.
- Never attempt to open, repair, or make any adjustments to the pump and/or battery compartment.
- Never use any attachments or nozzle adapters not intended for use with this specific model air bed and pump.
- Never operate the pump if the batteries are corroded, if the battery compartment door is broken or missing, if the pump is not working properly, if it has
been dropped or otherwise damaged, or if it has been exposed to water.
- Never operate the pump for an period exceeding 5 minutes of continuous use.
- Keep the pump and battery compartment away from heat sources and open flame.
- Never operate the pump with any of the air openings or vents blocked. You must remove the safety cap from the pump top before inflating.
- Keep air inlets free of lint, hair, and similar foreign objects.
- Never operate the pump in the presence of flammable fumes or liquids, or an area where these have recently been present.
- Never insert or place any item or foreign object into any of the openings on this product.
ADDITIONAL WARNINGS:
- The Maximum Weight for this bed is 400 LBS / 181 KGS Total.
- This item is intended for ages 12 and up.
- Do not sit or lie on the mattress during inflation or deflation.
- Make sure that the floor is clear of any items which may puncture or damage the mattress fabric.
- After inflation, a significant increase in temperature may cause the internal air to expand. Air must be released to prevent the bed from failing due to overpressure. A large decrease in temperature
will cause air to contract, and additional air may be required. Avoid using this bed in extreme temperatures. Never inflate the bed in near-freezing or below freezing temperatures.
- Keep mattress away from open flames and heaters.
- Do not stand, walk, or jump on the mattress.
- Do not allow children or pets to play on or near the bed.
- Do not smoke on the bed. This furnishing has not been evaluated for flammability or cigarette ignition resistance.
- The mattress is not a life saving device or pool toy. Do not use as a flotation device or as a water toy.
- Never inflate this bed with a hair dryer or air compressor.
- Do not let young children sleep on this mattress until mature enough to sleep in an adult bed. Young children can suffocate, especially in the case of unexpected deflation. Never leave a child or
disabled person unattended or sleep on the same mattress as a young child.
- Do not leave the mattress unattended during inflation or deflation. The pump’s operation and inflation/deflation process must be monitored by a responsible adult.
INFLATING:
1. Check your surroundings for any sharp objects on the ground/floor that may cause damage to the bed (nails, screws, sharp rocks, etc.).
2. Unfold the bed and lay it flat on the floor.
3. Attach an adaptor nozzle to the Pump and ensure it is in the “OFF” position.
4. Insert 4 NEW “D” batteries into the Pump. (see instructions on reverse side of this sheet)
5. Make sure the pump nozzle vents are clear of any obstructions.
6. Open both outer and inner seals on the inflation valve on the side of the bed as shown in Figure 1.
7. Insert the largest adaptor nozzle tip into the valve on the bed and turn the pump on.
8. Inflate to about 80%. Close one-way inner seal as shown in Figure 2 so that rubber “needle” is showing.
9. Switch to nozzle to middle adaptor and continue inflating. When air mattress reaches the desired firmness, switch the pump off.
DO NOT OVERINFLATE:
If this product rocks back and forth easily when placed on a flat surface, slowly release air until it becomes stable.
DEFLATING:
1. Fully open the valve on the bed (inner and outer seal) and allow the air to escape.
2. Once almost fully deflated, attach the nozzle adaptor to the “DEFLATE” vent on top of the pump.
3. Turn the pump on to remove the remaining air.
4. Close the valve seals, and carefully fold the bed and place into the storage bag.
NOTE: If you are going to be storing your bed for an extended period of time, make sure to remove the batteries from the pump before doing so.
IMPORTANT:
ADDITIONAL INFORMATION REGARDING INFLATION PRACTICES, PUMP USE, PUMP SAFETY, AND USING THE REPAIR KIT ARE LOCATED ON THE REVERSE SIDE OF THIS SHEET.
FULLY READ THIS INFORMATION BEFORE USING THIS PRODUCT.
CUSTOMER SERVICE:
E-mail: [email protected]
Toll-Free Phone: 866-498-5269 (9am-5pm, M-F)
Pure Global Brands, Inc. West Palm Beach, FL 33411
Please visit www.pureglobalbrands.com and register your product to ensure warranty
coverage and for any important safety or product updates. Use search word: 6007FLB.
Figure 1
Figure 2
