CUSTOMER SERVICE: 866-498-5269
Low Profile Twin Size Air Bed (PVC)
74 x 38 x 9 inch*
(inflation sizes are approximate)*
Model No. 6005TLB
Ensure the following items are included in the
package:
● Twin Sized Mattress
● Battery Operated Pump
(batteries not included)
● Carry and Storage Bag
● Repair Kit
TO INFLATE:
1.
Check your surroundings for any sharp objects on the ground/floor that may cause damage to the
bed (nails, screws, sharp rocks, etc.).
2.
Unfold the bed and lay it flat on the floor.
3.
Attach an adaptor nozzle to the Pump and ensure the it is in the “
OFF
” position.
4.
Insert 4 NEW “D” batteries into the Pump. (see instructions on reverse side of this sheet)
5.
Make sure the pump nozzle vents are clear of any obstructions.
6.
Insert the adaptor nozzle tip into the valve on the bed and turn the pump on.
7.
When air mattress reaches the desired firmness, switch the pump off.
DO NOT OVERINFLATE! INFLATE UNTIL THE WRINKLES IN PVC ARE ALMOST
GONE, AND THE MATTRESS IS FIRM.
Never inflate the bed beyond its stated size.
TO DEFLATE:
1.
Open the valve(s) on the bed and allow the air to escape.
2.
Once almost fully deflated, attach the nozzle adaptor to the “DEFLATE” vent on top of the pump.
3.
Turn the pump on to remove the remaining air.
4.
Close the valves, and carefully fold the bed and place into the storage bag.
NOTE:
If you are going to be storing your bed for an extended period of time, make sure to remove
the batteries from the pump before doing so.
IMPORTANT:
ADDITIONAL INFORMATION REGARDING INFLATION PRACTICES, BATTERY
INSTALLATION, PUMP USE, PUMP SAFETY, AND USING THE REPAIR KIT ARE LOCATED ON THE
REVERSE SIDE OF THIS SHEET.
YOU MUST FULLY READ THIS INFORMATION BEFORE USING THE PUMP OR INFLATING THIS PRODUCT.
Please visit
www.pureglobalbrands.com
and register your product to ensure warranty
coverage and for any important safety or product updates. Use search word: 6005TLB.
●
DO NOT OVER OR UNDER INFLATE.
●
CAUTION: AFTER INFLATION, A SIGNIFICANT CHANGE TO HOT
WEATHER WILL CAUSE AIR TO EXPAND. YOU MUST RELEASE AIR
TO PREVENT THE AIR BED FROM FAILING DUE TO OVER-
PRESSURE. A CHANGE TO COLD WEATHER WILL CAUSE AIR TO
CONTRACT. YOU MAY NEED TO ADD AIR TO MAINTAIN FIRMNESS.
AVOID USING THIS AIR BED IN EXTREME TEMPERATURES.
●
KEEP AWAY FROM SHARP EDGES, NAILS, OR ANY SHARP OR
POINTED OBJECTS.
●
KEEP AWAY FROM OPEN FLAME AND HEATERS.
●
DO NOT STAND, WALK, OR JUMP ON BED. DO NOT ALLOW
CHILDREN TO PLAY OR JUMP ON BED.
●
DO NOT SMOKE ON THE BED.
●
THIS IS NOT A LIFE SAVING DEVICE. DO NOT USE AS A
FLOTATION DEVICE OR AS A WATER TOY.
●
DO NOT LET YOUNG CHILDREN SLEEP ON THIS MATTRESS
UNTIL MATURE ENOUGH TO SLEEP IN AN ADULT BED. YOUNG
CHILDREN CAN SUFFOCATE, ESPECIALLY IN THE CASE OF
UNEXPECTED DEFLATION. NEVER LEAVE A CHILD UNATTENDED
OR SLEEP ON SAME MATTRESS AS A YOUNG CHILD.
●
FILL WITH COLD AIR ONLY. NEVER USE A HAIR DRYER TO
INFLATE.
●
DO NOT MIX OLD AND NEW BATTERIES OR BATTERY TYPES.
●
MAXIMUM WEIGHT:
250 LBS/114KGS TOTAL.
Manufactured by Pure Global Brands, Inc.
West Palm Beach, FL 33411
