CUSTOMER SERVICE: 866-498-5269
Queen Raised All-In-One with Sueded Top
80 x 60 x 18 inch
Model No. 6004QRB
Ensure the following items are included in the
package:
● Queen Sized Raised Mattress with
Built-In Pump
● Carry and Storage Bag
● Repair Kit
TO INFLATE:
1.
Check your surroundings for any sharp objects
on the ground/floor that may cause damage to the
bed (nails, screws, sharp rocks, etc.).
2.
Unfold the bed and lay it flat on the floor.
3.
Ensure the Pump is in the “
OFF
” position.
4.
Connect the Pump cord to an electrical outlet as
shown above.
5.
Make sure the air inlet vents are clear of any
obstructions.
6.
Rotate the Pump knob clockwise to the
“INFLATE”
position as shown in Figure 1.
7.
When air mattress reaches the desired firmness,
rotate the Pump knob back to the
“OFF”
position as shown in Figure 2.
DO NOT OVERINFLATE! INFLATE UNTIL THE WRINKLES IN PVC ARE ALMOST
GONE, AND THE MATTRESS IS FIRM.
TO DEFLATE:
1.
Connect the Pump cord to an electrical outlet as shown above.
2.
Rotate the Pump knob counterclockwise past the
“OFF”
setting to
“DEFLATE.”
3.
Allow the bed to fully deflate, and then turn the
knob to the
“OFF”
position.
4.
Disconnect the Pump cord from the outlet and
place it into the Cord Storage Pocket.
5.
Fold the bed and place into the carry bag if
desired.
INFLATING WITH EMERGENCY FILL VALVE: In the event of a failure of the Built-in Pump, this
bed is equipped with a secondary inflation valve. Extend small valve out from side of bed. Open
valve cap and fill bed with external pump (not included).
DO NOT
use a high pressure pump. A
Manual Pump--such as a foot pump or bike pump w/ adapter is recommended. Close valve cap
and push valve back into bed when done.
DO NOT OVERINFLATE
ADDTIONAL INFORMATION FOR USING REPAIR KIT ON REVERSE SIDE
●
DO NOT OVER OR UNDER INFLATE.
●
CAUTION: AFTER INFLATION, A CHANGE TO HOT WEATHER
WILL CAUSE AIR TO EXPAND. YOU MUST RELEASE AIR TO
PREVENT AIRBED FROM FAILING DUE TO OVERPRESSURE. A
CHANGE TO COLD WEATHER WILL CAUSE AIR TO CONTRACT.
YOU MAY NEED TO ADD AIR TO MAINTAIN FIRMNESS.
AVOID USING IN EXTREME TEMPERATURES.
●
KEEP AWAY FROM SHARP EDGES, NAILS, OR ANY SHARP OR
POINTED OBJECTS.
●
DO NOT STAND, WALK, OR JUMP ON BED. DO NOT ALLOW
CHILDREN TO PLAY OR JUMP ON BED.
●
KEEP AWAY FROM OPEN FLAME AND HEATERS.
●
DO NOT SMOKE ON THE BED.
●
THIS IS NOT A LIFE SAVING DEVICE. DO NOT USE AS A
FLOTATION DEVICE OR AS A WATER TOY.
●
DO NOT LET YOUNG CHILDREN SLEEP ON THIS MATTRESS
UNTIL MATURE ENOUGH TO SLEEP IN AN ADULT BED. YOUNG
CHILDREN CAN SUFFOCATE, ESPECIALLY IN THE CASE OF
UNEXPECTED DEFLATION. NEVER LEAVE A CHILD UNATTENDED
OR SLEEP ON SAME MATTRESS AS A YOUNG CHILD.
●
FILL WITH COLD AIR ONLY. NEVER USE A HAIR DRYER TO
INFLATE.
●
MAXIMUM WEIGHT:
500 LBS./226KGS TOTAL.
●
SEE ADDITIONAL INFORMATION
REGARDING REPAIR KIT ON BACK
Manufactured by Pure Global Brands, Inc.
West Palm Beach, FL
