Installation and setup
Page C-4
Operator’s Manual PiCCO
2
Version 3.1
2.2.1
Touchscreen
Measurement and display options as well as any configuration can be reached directly by touching the
respective element on the touch screen. All input can be directly made on the screen. Numerics can be
directly entered on the screen by means of a touch keyboard.
To switch to another screen just select another element on the screen or use the Main button.
2.2.2
Function keys
Figure 13: Function keys
ON/OFF key: This key is used to switch the device on and off. As soon as the mains power switch is pressed
at the rear side of the device, a green light appears. The green light indicates that the device is connected to
the mains power supply. A blinking green light indicates that the battery is being charged. By pressing the key
continuously for 4 seconds during operation, the device will shutdown and restart.
Opening the help screen
Print key: Starts a printout, depending on the connected printer device (USB or thermal transfer printer)
Mute key: Pausing of the alarm for 2 minutes. The orange light indicates an alarm even if there is an acoustic
alarm pause.