INTRODUCTION
Thank you for choosing the
PULSETEC
Battery Discharger & Analyzer
B-GEN 200
. The
B-GEN 200
is a powerful discharging device that allows the user to discharge a battery at up to 30 amps or 200
watts and also measures and compares the performance of batteries.
B-GEN 200
allows for the precise
measurement of battery capacity and takes the guesswork out of choosing the best battery for your
application.
The
B-GEN 200
is much more than a simple battery discharger or a battery load tester. It will test virtually
any type or size of battery, any chemistry or number of cells, up to 35 volts.
The
B-GEN 200
is ruggedly built and uses XT60 connector for battery connection. It is small with a high
performance cooling system. Digital LED indicates battery voltage, discharge capacity and discharge
current.
FEATURES
•
It displays real time battery voltage, discharged capacity and discharge current.
•
It can test battery capacity that helps select batteries with desired capacity.
•
It saves time when user wishes to store their large capacity batteries.
•
It helps activate the best performance of your batteries for competition.
FEATURES
1- BATTERY CONNECTION
2- POWER ON
3- SELECT CUT-OFF VOLTAGE AND DISCHARGE CURRENT
4- START DISCHARGING PROCESS
Press and hold Dial button for 2 seconds, the discharger will start
with beep sound.
During the discharging process, the digital LED(V/mAh) will alternate
the display of battery voltage and discharging capacity.
5- STOP DISCHARGING PROCESS
During the discharging process, Press the dial once to stop the
discharging process, the digital LED(A) shows “
Stop
”.
5- PROCESS FINISHED
When the discharging process has finished, the discharger will beep
5 times, and the LED(V/mAh) will show battery voltage and discharge
capacity respectively.
Cooling Fan
ROTARY DIAL
for Setting Cut-off Voltage
Discharging Current
Start/Stop Button
Press the Dial once to power
ON the discharger, the LED
(V/mAh) will blink with beep
sound.
The LED(V/mAh) shows the current battery voltage.
By rotating the Dial button to change cut-off voltage, then press Dial button once to confirm.
Use the Dial button to modify the discharge current
Current Display (A)
DATA Link
XT-60 Battery Port
Heat Sink
Battery Voltage / Capacity
Display (mAh)
INSTRUCTION MANUAL
SPECIFICATIONS
Accepted Voltage Range : . . . . . . 5,40 - 35,00V
Low Voltage Alert : . . . . . . . . . . . . . . . . . . .<5,2V
High Voltage Alert : . . . . . . . . . . . . . . . . . . . >35V
Max Discharge Power : . . . . . . . . . . . . . . . .200W
Discharge Current range : . . . . . 0,01A - 30,00A
Current consumption in Sleep Mode . . . <100uA
Standby Current : . . . . . . . . . . . . . . . . . . <35mA
Current Display Accuracy: . 0.01-10.00A ±60mA
10.00-30.00A ±2%
Voltage Display Accuracy: . . . . . 5.4-10V ±60mV
10-20V ±120mV
20-35V ±160mV
Capacity Display Accuracy : . . . . . . . . . . . . . ±3%
Dimension : . . . . . . . . . . . . . . . . 136x105x96mm
Weight : . . . . . . . . . . . . . . . . . . . . . . . . . . . . 858g
1
2
#PC-022-001
