background image

10

Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.

Repair and Maintenance

Only use the supplied battery charger. If battery charger is damaged discontinue use immediately and replace with a Pulse Performance 

Products™ recommended battery charger.

Battery Charger

Wheels and drive system components are subject to normal wear and tear. It is the responsibility of the user to regularly inspect wheels for 

excess wear and adjust and replace drive train components as required.

Wheels

Most of the common replacement parts are available for purchase by calling (866) 434-6067.

Replacement Parts

• Call (866) 434-6067 to speak with a customer service representative

Repair Help

 

The brake is capable of locking up and skidding the rear wheel if not applied correctly.

Always try and avoid skidding as this could cause you to lose control of the scooter and will cause damage to the 

rear tire. Practice using the brake in an unobstructed open area to become familiar with its function and until you

can make smooth, controlled stops.

WARNING:

Summary of Contents for REVSTER 200















Reviews: