PULSAR MEASUREMENT
45
Level or Volume
If you want to set-up a level or volume application, as described in the
following examples, then choose
1
for
Level/Vol
. You will then be given a
choice of
1
=
Level
or
2
=
Volume
.
Choose Your Application
If you want to set-up a basic level monitoring application, as described in
the following example 1, then choose
1
for
Level/Vol
, and then
1
for
level
.
If you want to set-up a
level monitoring
application with control relays, as
described in the following
example 2
, then choose
1
for
Level/Vol
.
Followed by
1
for
level
and choose either control down (press 1) or control
up (press 2).
If you want to set-up a
volume
application, as described in the following
example 3
, then choose
1
for
Level/Vol
. Followed by
2
for
volume
, you
then need to decide if any control function is required and choose the
appropriate option no control (press 0), control down (press 1) or control up
(press 2).
Once you have chosen your application you will be asked a series of
questions which are answered by choosing the appropriate option as
detailed in the flow chart below. Once all the questions have been answered
you will be prompted to provide further information, as detailed in the
tables below, to complete the programming of the unit.
