PULSAR MEASUREMENT
31
Maintenance
There are no user serviceable parts inside UltraTWIN, except the mains fuse.
If you experience any problems with the unit, then please contact Pulsar
Measurement for advice.
To clean the equipment, wipe with a damp cloth. Do not use any solvents on
the enclosure.
Important Information
The unique DATEM software comes into operation as soon as power is
applied and is designed to monitor a
moving level
or
target
with the
transducer
in a
fixed position.
If, after any period of use, it should become necessary to move the
transducer, for any reason, from its original operating position, switch off
the UltraTWIN, before proceeding, in order to prevent any undesirable
updates to the DATEM trace. If after moving the transducer the reading is
not as expected, please refer to
Important Information
Please note that the on-board Lithium battery, mounted to the processor
PCB, is not user serviceable.
