Pulsar MICROFLOW, Instruction Manual, Page: 54 / 65

Page
48
Parameter Tab
This tab enables the user to change parameter settings in the MicroFlow sensor.
It is important to note the following to ensure that the sensor is correctly
programmed.
Upon every connection to the sensor, MicroFlow PC will synchronise the values
on the Parameter tab to that currently stored on the sensor, including the Modbus
ID of the sensor. Changing a parameter can be done in one of two ways:
1. Selecting the parameter and then entering/choosing a value from the
options available when highlighting the box.
2. Using the Manual Setting parameter box.
Important Information
Ensure that the correct parameter/register number is known before
making changes to any of the parameters and their values.