Pulsar MICROFLOW, Instruction Manual, Page: 22 / 65

Page
16
FlowCERT Wall Mount
The terminal strip is as detailed below. There is also a wiring diagram inside the
terminal access cover of the FlowCERT unit. For further information on how to
operate a FlowCERT unit, please refer to the separate FlowCERT user manual.
To set up a
MicroFlow sensor with the FlowCERT please refer to Chapter 5 –
Setting up your MicroFlow of this manual. The FlowCERT manual is also
available for download from the Pulsar website: https://www.pulsar-
pm.com/support/downloads/manuals.aspx .
Wire the MicroFlow sensor to the FlowCERT terminals as follows:
Terminal Connection Details
Cable Type
Red
Power
Black
0 volts
Orange
RS485+
(B)
White
RS485-
(A)
Blue
RS485
Common
Terminal no. 41
44 36 35 34
The Green cable (cable screen) should be connected to Earth such as terminal 44
(0V).