Pulsar Flow Monitor, Instruction Manual

Page: 18 / 61

Page
12
Operating the Controls
Display
Whilst in the Run Mode it will display the current flow or velocity reading
and its units of measurement, along with the mA output and status messages
with regards to the communication status and Fail Safe Mode.
When in Program mode, the display is used to read information on the menu
system, the parameter number and parameter details and values, which can
be entered.
During Test Mode the display is used to monitor the simulated flow or
velocity and mA output.
1) Main Display , 12-digit alpha numeric display:
Run Mode: current measurement displayed, dependent on measurement
unit's chosen, and value of Hot Key function selected.
Program Mode : displays parameter number and values entered for
parameters.
Test Mode: displays simulated flow or velocity.
2) Auxiliary Display , scrolling 12-digit alpha numeric display
Run Mode : displays units, totaliser or status messages on
communications, detail of Hot Key function selected.
Program Mode: displays Menu and Sub Menu headings, parameter
details and options.
0.53
Litres/sec
1
2