www.pulsar.pl
INTRE-C
25
The next operation to be performed is optimal setting of the communication speed. Upon pressing the
„Detect Speed” button, the interface performs a speed test with all PSUs on the bus and uses it as a basis to select
the optimal communication speed, common for all PSUs.
In order to confirm the introduced changes, press „Save”.
4.13 Update.
The devices support the function of software update by a file which may be downloaded from
In order to update the software of the interface or PSUs:
- download the latest version of the file from
-
press „Select File” in the browser and indicate its drive location. The list of devices compatible with the
uploaded file will be loaded
-
press „Start” – the new programme will be uploaded to the device
CAUTION! During a software update, do not disconnect the device until the process is accomplished.
Fig.35.
View of the „Update” tab.
