INTALLATION MANUAL
ENGLISH
code:
AWO 610
name:
Enclosure
DIN1
metal enclosure for: SSWiN, KD,….
IM610
1st Edition, 02 Feb 2012
Supercedes the: ------------------------ edition
1. Intended use:
Due to its design, the AWO610 enclosure can be used as an integrating part of installation systems, such as: CCTV, KD,
SSWiN, etc. The enclosure is to be used for mounting (depending on configuration):
•
system KD controller and additional modules or other devices adjusted for mounting on a TH/TS35 (35mm) DIN
rail
•
transformer, series: TRP, TRZ, TOR
•
enclosed power supply units, series: PS, PSB
2. Product description:
The enclosure includes a 315mm-long DIN rail mounted to the bottom. It is equipped with a mounting plate, for
transformers or power supply units. The enclosure accommodates a 17Ah/12V battery. Anti-tampering system indicates
an unauthorized opening of the enclosure. There is also a possibility to mount an additional anti-tampering system, which
would prevent the device from being ripped off the wall (PKAZ005). In a basic version, the enclosure is bolted in the
faceplate with 2 screws. The faceplate is embossed so that a lock assembly can be fitted. The lock can have the same
code: MR027, or a different one: MR008.
There is an 8mm space between the enclosure and the wall for the cables of the device accommodated by the enclosure.
3. Mounting:
The enclosure shall be mounted by a qualified installer with appropriate permissions and qualifications for
230V/AC installations and low-voltage installations (required and necessary for a given country). It shall be fitted in
confined spaces, according to the environment class II, with normal air humidity (RH=90% max. without condensation)
and the temperature from -10°C to +40°C.
4. Specifications:
SPECIFICATIONS
Fitting battery
17Ah/12V
Anti-tamper protection
1x – enclosure opening
TAMPER – output ampacity (max)
500mA@50Vdc
Enclosure: IP
IP 20
Operating temperature
-10ºC÷40ºC
Relative humidity RH – max.
90 [%]
Internal dimensions
(WxHxD)
345 x 355 x 80
[-/+2] [mm]
Additional accessories
Lock assembly, same code: MR027
Lock assembly, different code: MR008
Insulating gland M20x1,5
TAMPER, against ripping off the wall (PKAZ005)
Materials
Sheet metal DC01, thickness: 1,0mm
Rust protection
Colour: RAL 7035 grey, texture finish
Use
Inside/
Surface-mounted
Net weight
~3.80 [kg]
Gross weight
~4.10 [kg]
