background image

LEDs:

 The 

RED

 LEDs show when there is no signal or data is Lo.  

The 

GREEN

 LEDs show when there is a signal or data is Hi.  

Typically both red and green LEDs will be on, indicating a digital data 
stream. 

Note:

 illuminated LEDs do not mean that the data is valid; they show 

its presence.   Errors can often occur if the DMX line is not 
terminated. 
The end of the DMX line(s) must always be terminated with a 100

 

resistor connected between and signal-, this resistor can 
conveniently be mounted in a 5 pin XLR plug which should be 
inserted in the last unit on the DMX line(s). 
The Thru and each of the output lines 1-8 need terminating. 
DMX line terminating plugs are available from Pulsar, Product No. 
21750.4 

Unlike DMX, PMX may be branched and needs no termination. 

TRUSS MOUNTING   

Two M10 nutserts are provided in the base 

of the DataSplitter.  The maximum thread depth from panel to bottom 
of nutsert is 25mm.  Select a suitable length M10 bolt to attach the 
hangers to the DataSplitter and attach the hangers to the truss. 
A safety chain may be attached to one of the rack mounting holes.

 

PORTABLE APPLIANCE TESTING 

The DataSplitter may be 

safely Earth Bond and Insulation Tested (500V). 

STANDARDS 

- The DataSplitter complies with the following 

International and National Standards: 

Electrical Safety

 - IEC65, EN60065, BS415 

EMC 

- EN50081-1, EN50014, EN55022, EN50082-1 

Rack Mounting

 - IEC297 

Index of Protection 

- IP20 

Marking Directive 93/68/EEC

  - The 

DATASPLITTER

 

meets both the EMC Directive 89/336/EEC and the Low 
Voltage Directive 73/23/EEC. 

GUARANTEE   

Your DataSplitter is guaranteed for a period of 12 

months from the date of original purchase.   The guarantee is limited 
to parts and labour.   The guarantee is void if the unit is misused or 
unauthorised persons perform repairs.   In the unlikely event of a fault 
occurring in the DataSplitter do not use without repair.  Return the 
unit, with a description of the fault, to your supplier or direct to Pulsar 
for immediate attention. 
 

The Pulsar 

DataSplitter

 has been designed  to work with and 

complement the following products.   Please contact us to receive 
further details of these superb products! 

Digital Control 
Product No. 

Controller 

20054 

Minipiece 54 Control Desk 

23000/.1 

48/96 Channel Masterpiece Control Desk 

24000 

108 Channel Masterpiece Control Desk 

20216 

216 Channel Masterpiece Control Desk 

27216 

Masterpiece Replay Unit 216 

Control Desks 
Product No. 

Controller 

23930 

  18 Channel 1 Preset Analogue/DMX Desk/Tester 

23940 

  12 Channel 2 Preset Manual Desk with DMX 

23950 

  18 Channel 2 Preset Manual Desk with DMX 

62014 

  18 Channel DMX Board 

Signal Processing 
Product No. 

Controller 

27770 

    6 Channel PMX/DMX  –  0-10V Interface 

27350 

  18 Channel Universal Interface 

27300 

  36 Channel Universal Interface 

27400 

  18 Channel Switching Interface 

Rackpaks and Datapaks 

A range of dimming, and switching, packs for control of up to 20A per 
channel. 

ChromaRange 
Product No. 

Controller 

24500 

ChromaZone 12 Way Controller for ChromaRange  

Cables 
Product No. 

Cable 

21750.4 

DMX Line Terminator Plug 

21755.1 

  2m DMX Ext. Lead - 5 core (1 XLR-5 Plug, 1 Skt) 

21755.2 

  5m DMX Ext. Lead - 5 core (1 XLR-5 Plug, 1 Skt) 

21755.3 

10m DMX Ext. Lead - 5 core (1 XLR-5 Plug, 1 Skt) 

DIMENSIONS AND WEIGHTS 

 

 

 

 

 

 

Code 

Unit 

Width Height Depth Weight 

 

 

mm  mm  mm 

kg 

DataSplitter  8 Way Universal Buffer/Splitter  

486  44.5  110 

OTHER INFORMATION 

 

ACCESSORIES 

LEDs AND TERMINATION 

Reviews: