1
AWZ 710
PN-K
v.1.0
Foot-operated emergency button.
EN
Edition: 3 from the 9
th
September 2010
Supercedes edition: 2 from the 10
th
July 2009
1. Technical description.
1.1 General description.
The foot-operated button is used for transmitting signal indicating alarm situation occurrence, calling help (e.g. to
the alarm central, monitoring transmitter, controller). The foot-operated button converts the signal of pressed button into a
change of the alarm status. The PN-K foot-operated button is equipped with numerous programming functions which
enable the flexible adjustment to requirements of a particular installation. The pushbutton detector is made according to
the optical technology. The output signal is presented in a form of shorting/opening contacts of reed relay switch
(noiselessly). The atni-sabotage contact is based on a microswitch with gold-covered contacts the PCB surface has been
covered with lacquer to provide protection against damp and dust. The button has got a compact casing and is equipped
with rubber anti-slip feet.
Information about types:
Model
Description
AWZ 700
PN
Foot-operated emergency button.
AWZ 710
PN-K
Foot-operated emergency button, programmable.
1.2 Description of elements and connectors on PCB.
Table 1.
Nr
[rys.1]
Element description
[1]
Anti-sabotage switch connector
[2]
Wire holder
[3]
PROG/RESET
button
[4]
Supply connector and button output
[5]
LED
(red) operations signaling (programming)
Table 2.
[1] [4]
Connectors descriptions
TAMP
NC anti-sabotage switch output
12V
GND
Supply output DC (12V= +U, GND)
RST
Button reset output
C
NO
NC alarm transmitter output
