Pulsar ACCOLADE 2 LRF, Manual

Page: 55 / 64

USB Connection
1. Connect one end of the USB cable (16) to the Micro-USB(15) port of your device, and
the other end to the USB port of your PC/laptop.
2. Turn the device on with a short press of the ON/OFF (1) button (device that has been
turned off cannot be detected by your computer).
3. Your device will be detected by the computer automatically; no drivers need to be
installed.
4. Two connection modes will appear on the display: Power and Memory Card (external
memory).
5. Select connection mode with UP (2)/DOWN (5) buttons.
6. Confirm selection with a short press of the Menu (3) button.
Connection modes:
Power
In this mode, when a computer is used as an external power supply, the icon ?
appears in the status bar. The device will continue operating and all functions are
available.
The Battery pack installed in the device is not being charged!
When disconnecting from the computer, the device will continue to operate from the
battery pack (if it is present and holding enough charge).?
Memory Card (external memory)
In this mode the device is detected by the computer as a flash card. This mode is
designed for work with the files saved in device's memory. The device's functions are not
available in this mode; the device turns off automatically.