Pulsar ACCOLADE 2 LRF, Manual

Page: 37 / 64

Wi-Fi Settings
This menu option allows you to set up your device for operation in a Wi-Fi network.
1. Press and hold down the Menu (3) button to enter the main menu.
2. Select the Wi-Fi Settings
Image not found or type unknown
menu option with the UP (2)/ DOWN (5) buttons.
3. Press briefly the Menu (3) button to enter submenu.
4. Select the desired menu item with the UP (2) / DOWN (5) buttons.
Password Setup
This menu option allows you to set a password to access your thermal imager from an
external device.
The password is used to connect an external device (i.e. smartphone) to your thermal imager.
1. Press briefly the Menu (3) button to enter the Password Setup
submenu .
2. The default password (12345678) will appear on the screen.
3. Set the desired password with the UP (2) / DOWN (5) buttons.
4. Switch between digits with a short press of the Menu (3) button.
5. Save the password and exit the submenu with a long press of the Menu (3) button.
Access Level Setup
This menu option allows you to set required access level of the Stream Vision application to
your device.
Access level Owner.The Stream Vision user has the complete access to all device's
functions.
Access level Guest. The Stream Vision user has the access only to the real time video
stream from the device.
1. Press briefly the Menu (3) button to enter the Access Level Setup
submenu.
2. Select the access level with the UP (2) / DOWN (5) buttons.
3. Press and hold the Menu (3) to confirm your selection and exit from the submenu.
To see the button operation scheme click here .