Video Recording and
Photography
Axion XQthermal imagers feature video recording and photography of the image being
observed to the internal memory card.
Before using this feature please set the date and time (see
section).
The built-in recorder operates in two modes – Video and Photo:
Video mode. Video recording
1. Switch to Video mode by pressing and holding the DOWN/REC (2) button.
2. The
icon and the remaining recording time in HH:MM (Hours:Minutes) format are
displayed in the upper left corner, for example 12:10.
3. Press the DOWN/REC (2) button briefly to start video recording.
4. When the video recording starts, the icon
will disappear and the REC icon and timer
in MM:SS (Minutes:Seconds) format will appear
.
5. Pause and resume recording video with a short press of the DOWN/REC (2) button.
6. Stop recording video with a long press of the DOWN/REC (2)button.
7. Video files are saved to the built-in memory card after the video recording has been
stopped.
8. Press and hold theDOWN/REC (2) button to switch between the Videoand Photomodes
(Video-> Photo-> Video…)
Photo Mode. Capturing an image
1. Switch to the Photomode by pressing and holding the DOWN/REC (2) button.
2. Press the DOWN/REC (2) button briefly to take a photo. The image freezes for 0.5 sec
while the photo is saved to the internal memory.
Notes:
You can enter and operate the menu during video recording;
The counter for multimedia files cannot be reset;
Recorded videos and photos are saved to the internal memory card in the format
img_xxx.jpg (photos); video_xxx.mp4 (videos) where xxx is a three-digit counter for
videos and photos.
Warning:
