4
Safety Considerations:
•
Read and understand all related instructions and documentation before attempting to
install or maintain this equipment
•
Observe all special instructions, notes, and cautions.
•
Act with care and exercise good common sense and judgment during all installation,
adjustment, and maintenance procedures.
•
Ensure that all safety and work procedures and standards that are applicable to your
company and facility are followed during the installation, maintenance, and operation of
this equipment.
Notice
Information and specifications in this document are subject to change without notice.
Trademarks
Pulsa Series®, PulsaPro®, and Pulsar® and PULSAlarm®are registered trademarks of
Pulsafeeder, Inc.
Revision History
Revision Implemented
By
Revision
Date
Approved
By
Approval
Date
Reason
B
Engineering
04/27/2007 Technical
Service
04/27/2007 Material reference to
“PTFE”
C
Engineering,
Quality,
Compliance
04/07/2015 Technical
Service
04/07/2015 Remove references to
PULSAlarm® Vacuum
offering. Add ATEX and
IECEx information, general
updates.
D
Engineering
03/03/2016 Technical
Service
03/03/2016 Modify temperature and
code information on front
and back cover only
E
Technical
Service
05/31/2017 AM
Manager
06/02/2017 Modify switch trip point
settings and remove
paragraph 7.4 for vacuum
system priming.
F
Engineering
11/15/2019 Product
Line
Manger
12/15/2019 Corrected wording in
Introduction. ATEX and
IECEx updates
Summary of Contents for PULSAlarm Pulsa Series
Page 17: ...18...
