Puls FIEPOS FPS300, Manual

Page: 23 / 28

FPS300.245-049-102
All parameters are specified at 24 V, 12.5 A, 230 Vac, 25 °C ambient and after a 5 minutes run-in time unless otherwise noted.
Apr. 2022 / Rev. 0.2 FPS300-EN www.pulspower.com 23 / 28
Approvals and Fulfilled Standards
IEC 62368
CB Report
CB Scheme Certificate
IEC 62368-1 - Audio/video, information and communication
technology equipment - Safety requirements
Output safety level: ES1
IEC 61010 CB Scheme Certificate
IEC 61010-2-201 - Electrical Equipment for Measurement, Control and
Laboratory Use - Particular requirements for control equipment
IEC 60950
CB Report
Manufacturers Declaration
IEC 60950-1 - General safety requirements for Information Technology
Equipment (ITE)
UL 61010 UL Certificate
Listed equipment for category NMTR - UL 61010-2-201 - Electrical
equipment for measurement, control and laboratory use - Particular
requirements for control equipment
Applicable for US and Canada
E-File: E198865
Semi F47 Test Report
Voltage Sag Immunity for Semiconductor Processing Equipment Tested
for
AC 208V L-L or L-N mains voltages, nominal output voltage and
nominal output load
VDMA 24364 Paint Wetting Impairment Substances Test (or LABS-Test)
Tested for Zone 2 and test class C1 according to VDMA 24364-C1-L/W for
solvents and water-based paints
Regulatory Compliance
EU Declaration of
Conformity Trade conformity assessment for Europe
The CE mark indicates conformance with the European
–
EMC directive
–
Low-voltage directive (LVD)
–
RoHS directive
WEEE Directive Manufacturer's Statement
EU-Directive on Waste Electrical and Electronic Equipment (WEEE)
registered in Germany as business to business (B2B) products.
WEEE-Reg.-Nr. DE 55837529
REACH Regulation
(EU) Manufacturer's Statement
EU regulation regarding the Registration, Evaluation, Authorization and
Restriction of Chemicals (REACH) fulfilled.
China RoHS Manufacturer's Statement
The device meets the Measures for Restriction of the Use of Hazardous
Substances in Electrical & Electronic Products according the China-RoHS
requirements.
The device is marked with EFUP symbol 25 years (Environmentally
Friendly Use Period)
IEC/EN 61558-2-16
(Annex BB) Safety Isolating
Transformer
Safety Isolating Transformers corresponding to Part 2-6 of the IEC/EN
61558