Page 7
Connectors
TM-1327GE Software
Figure 7.
HR10A-10R-12P
2.2 Ethernet
The GigE socket, marked on the camera’s back panel as “GigE,” is a standard RJ-45 Ethernet socket.
Use at least cat5e UTP cables (Cat6 cables are preferred). If you wish to connect the camera directly to
a PC, you must use a cross-over cable. Refer to the
Cam2Net User's Manual
for details.
1
Figure 8.
Ethernet GigE Socket
1. JAI PULNiX recommends the use of shielded cables to reduce emissions and for CE/FCC
compliance. Double-shielded cables will further reduce emissions.
1
9
2
10
8
3
11
12
7
4
5
6
GigE
Summary of Contents for TM-1327GE series
Page 2: ......
Page 4: ......
Page 8: ...Page viii TM 1327GE Series Progressive Scan Camera...
Page 36: ...Page 28 GigE Series Camera Serial Commands TM 1327GE Software...
