04
|
PULLMAN PC4.0
PC4.0 PULLMAN
|
05
TROUBLE SHOOTING
PROBLEM
CAUSE
REMEDY
* Motor does not
start or stops.
No power supply.
Check cable, plug and
socket. If still inoperative,
contact service agent.
Suction force
gradually decreases.
Dust-bag is full, filters are dirty or
suction path is blocked.
Replace dust-bag, clean
or replace filters, removed
objects from suction path.
* This appliance is fitted with an automatic overload device. Should the appliance stop, switch
off and unplug from mains. Check to see if filters are blocked or if the suction path is
blocked. Clean or replace filters and remove any obstructions from path. Wait 30 minutes
before reconnecting and switching back on.
FLEXIBLE HOSE
ROBUST CASTORS
ALL PURPOSE
FLOOR TOOL
SUCTION CONTROL
STAINLESS STEEL WANDS
QUICK RELEASE CLIPS
SOFT TREAD WHEELS
MAINTENANCE
1. Empty the appliance after each use.
2. Fine dust particles can block filters and reduce suction.
Check after emptying and when replacing disposable paper bag.
3. Appliance can be used without a paper bag fitted but it’s not recommended.
4. Never run appliance without filters fitted or use with damaged filters.
5. Use a dampened cloth to clean exterior of appliance, never use thinners,
or petroleum based products as these could damage the thermo-plastic body.
ON-BOARD TOOLS
Your Pullman PC4.0 vacuum cleaner has been designed to handle a
number of cleaning chores – effortlessly and efficiently.
Accessories including a crevice tool and dusting brush are conveniently
located on the top of the cleaner.
CREVICE TOOL
UPHOLSTERY BRUSH
Summary of Contents for PC4.0
Page 3: ......
