39
Rev 1.3 10/20
Video 1:
http://
[Camera IP]
/video1.mp4
Video 2:
http://
[Camera IP]
/video2.mp4
Video 3:
http://
[Camera IP]
/video3.mp4
Video 4:
http://
[Camera IP]
/video4.mp4
Video note: It can take the camera time for the video files to be fully captured and processed. If they are not retrievable,
please wait an additional 30 – 60 seconds for the process to complete.
NDI
®
| HX Connection
The NDI
®
| HX connection allows you to connect and control your camera through any NDI compatible
hardware or software on your Local Area Network. Once your camera is setup on a LAN, you can utilize the
NDI
®
| HX connection.
Two Easy Steps:
1.
Download and install the latest NDI Tools.
2.
Select your camera within the NDI compatible device.
Step 1:
Download and install the NDI
®
Step 2:
Select your camera. The NDI
®
feed will utilize the camera’s device friendly name.
Upgrading the NDI
®
| HX
If you have a PTZOptics non-NDI camera, you can upgrade it by following the four (4) steps below.
1.
Purchase a PTZOptics NDI License. Visit
https://ptzoptics.com/where-to-buy/
2.
Open NDI Studio Monitor and select the camera you wish to upgrade.
3.
Click the “Register” button in the bottom right section of Studio Monitor.
4.
Enter your NDI License key and click “Enable NDI”.
If you have additional camera(s) to upgrade, please repeat the steps above for each camera. A separate
NDI License is required for each camera.
NewTek
®
, NDI
®
, & NDI
®
| HX are all registered trademarks by NewTek
®
.
Please note that your NDI License key is non-transferrable.
Summary of Contents for EPTZ NDI HX ZCAM G2
Page 2: ...i Rev 1 3 10 20...
