Pulsefit P261 Bluetooth Calling Fitness Smartwatch - Product Manual
Caution
:
1) This smartwatch is not a medical device.
2) A Thin Transparent Protective Film Covers the Sensor at the Backside of the Dial, protecting the Sensor Glass
from scratches.
Charging the Smartwatch
1. Turn OFF the Smartwatch before Charging.
2. Put the smartwatch on the charging adapter and gently push the dial down to make sure that the 2 small round
charging contacts at the backside of the dial are touching the 2 charging points in the adapter. It's a completely
sealed system free of exposed contacts. Plug the USB end of the cable into a DC5V/1A power source.
3. When the smartwatch is fully charged, remove the watch from charging and unplug the USB charging cable
from the power source.
NOTE: You can directly check the charging by pressing the crown-like button on the right side of the dial.
Pressing once will show the charging status on the display.
Downloading the Mobile App - pTron Fit+
1. For downloading the App go to Google Playstore/iOS Appstore and search for 'pTron Fit+'. Now, download and
install the app.
OR
Switch on the smartwatch, tap 1 time on the screen, then slide the screen 5 times from bottom to top, and there
you will find an icon with the name QR code along with a QR code logo. Just tap/touch 1 time this logo and then
you will get a QR code on the screen. Now, you can scan the QR code from your mobile phone. After scanning
you will get a link i.e,
https://ptron.in/pages/ptron-app-for-smartwatches
Just click on this link and you will get app download option for both Android as well as iOS.
Pairing
1. After mobile App installation, open the App and set up your profile.
2. Now, go to the smartwatch option and there you will find "Bind device".
3. Click on "Bind device" & then select your smartwatch.
4. In this way your smartwatch will get paired with your smartphone.
Audio Connectivity
1. At first turn the display to glow the light of display screen or press the crown button of the Smartwatch. (Awake
the smartwatch display by pressing the crown-like button upper side of the dial.)
2. Then slide the display screen to the upper side. (Touch the screen and towards upper side.)
