www.ptr.eu
PRODUCT DATA
Product designation
PCB - Marker Probe
Order data
SK790
ANWENDUNGSGEBIETE
PCB test ICT and FT
Test adapter
DESIGN / DIMENSION
DESCRIPTION OF FUNCTION
The marker probe is integrated in the test adaptor by means of the outer thread M12x1. During the
test sequence, the spring-loaded marking pin contacts the PCB, and, if the measurement is positive,
the marker probe motor receives a 12 V impulse. This initiates a rotation of the marking pin, which,
as a result of mechanical scoring, marks
∅
2 mm diameter circle.
CORRECT USE
Thanks to its compact design, PTR Messtechnik‘s PCB marker probe can be incorporated in every ICT
or function test adapter and was specifically designed for this purpose. The outer thread covers the
entire length, so the unit‘s height is easily adjustable and can be matched to any PCB. The sturdy,
exchangeable marking pin guarantees good marking of the PCB.
PTR HARTMANN GmbH
• Gewerbehof 38 • 59368 Werne / Germany
Phone: +49 (0)2389/7988-0 • Fax: +49 (0)2389/798888 • E-Mail: [email protected]
Thanks to its compact design, PTR Messtechnik's PCB marker
can be incorporated in every ICT or function test adapter. The
outer thread covers the entire length, so the unit's height is
easily adjustable and can be matched to any PCB. The sturdy,
exchangeable marking pin guarantees good marking of the
PCB.
OPERATING INSTRUCTIONS
SK 790
