8K UHD 4x1 HDMI Switcher
17
9. Firmware Upgrade
Please follow the steps as below to upgrade firmware by the Micro-USB port on the
rear panel:
1)
Prepare the latest upgrade file
(.bin) and rename it as “USERAPP.bin”
2)
Connect the switcher to the PC with USB cable, and then power on the switcher.
The PC will automatically detect a U-
disk named of “BOOTDISK”.
3)
Double-click the U-
disk, a file named of “READY.TXT” would be showed.
4)
Directly copy the
latest upgrade file (.bin) to the “BOOTDISK” U-disk.
5)
Reopen the U-
disk to check the filename “READY.TXT” whether automatically
becomes “SUCCESS.TXT”, if yes, the firmware was updated successfully,
otherwise, the firmware updating is fail, the name of upgrade file (.bin) should be
confirm again, and then follow the above steps to update again.
6)
Remove the USB cable after firmware upgrade.
10. Panel Drawing
