4K Presentation Switcher with Soft Codec & Matrix Outputs
31
7.2 Display Setting Tab
①
RS232
Baud Rate:
Supports 2400, 4800, 9600, 19200, 38400, 57600, 115200.
Command Ending:
NULL, CR, LF and CR+LF are selectable.
Display On:
Enter the RS232 command to turn on the display, and then click Save.
Input Delay:
Enter the delay time in seconds between the display on and display
input select commands. This delay may be between 1 and 100 seconds.
Display Input Select:
Enter the RS232 command to switch to the input which is
connected to the receiver.
Display Off:
Enter the RS232 command to turn off the display devices, and then
click Save. Click
to turn off the display devices twice.
Display Offx2 Delay:
Enter the RS232 command to set the interval between the two
Display Off commands.
:
Enter the RS232 command to turn up the display volume, and then click
Save.
Volume-:
Enter the RS232 command to turn down the display volume, and then
click Save.
