PTM T-FOLD, User Manual

Page: 42 / 44

T•FOLD User Guide
Page 41
2 ACTIVE The T•FOLD is
processing
1. If T•FOLD does not respond
within a reasonable period
of time (and no actual fold
job is executing), turn
T•FOLD off and then back
on again.
2. Contact your authorized
PPS Dealer or technician
3.5.2 "Switching the
T•FOLD OFF" p.33
3.5.1 "Switching the
T•FOLD ON" p.32
3 WAITING TO
PACK T•FOLD is in packing
mode
1. If T•FOLD does not
respond within a
reasonable period of time,
turn
T•FOLD off and then
back on again.
2. Contact your authorized
PPS Dealer or technician
3.5.2 "Switching the
T•FOLD OFF" p.33
3.5.1 "Switching the
T•FOLD ON" p.32
6.2.2 Error Messages
This section describes the contents of error codes as well as the check items and recovery actions.
These messages are displayed when an abnormal condition occurs while the machine is running.
Upon an occurrence of an error message, the machine stops its operation at the same time.
In some instances, the error may be cancelled by removing the error causes. After that, the machine
will restart its operation.
ERROR MESSAGE INFO RECOVERY ACTION
Reference
Flapper 1 fault
1. Turn machine OFF.
Turn it ON again and
check if the same
message appears.
2. Check the Movement
Mechanism for foreign
objects
3.5.2 "Switching the T•FOLD
OFF" p.33
3.5.1 "Switching the T•FOLD
ON" p.32
6.5 Maintaining the Movement
Mechanism of Flappers 1, 2 and 3
p.40
Flapper 2 fault
1. Turn machine OFF.
Turn it ON again and
check if the same
message appears.
2. Check the Movement
Mechanism for foreign
objects
3.5.2 "Switching the T•FOLD
OFF" p.33
3.5.1 "Switching the T•FOLD
ON" p.32
6.5 Maintaining the Movement
Mechanism of Flappers 1, 2 and 3
p.40
TABLE 6-2 OPERATION MESSAGE AND RECOVERY