PT113
Instruction Manual
16
•
The installation directory name should be written with Latin-1 characters. Folder names with
Chinese or other non-Latin-1 characters are not supported. Click Continue to accept.
•
If the Version Conflict window is displayed, click on the “No to All” button.
•
After finishing the installation, the Setup Wizard will inform you the software has been installed
successfully, click on the OK button.
•
When the Setup Wizard has closed you can start using the AzComT software.
6.2 CONNECTION TO AzComT
PT113 and AzComT connection is performed via the RS-232C service port for all instruments,
additionally, the PT113MB can use the RS-485port. The required communications cables are standard
accessories available from PT.
After executing AzComT from the start menu, select the version of the PT113 you will be configuring
and click OK.
