00042762.DOC, Version 1.0
17/20
Connections
Your speaker system is equipped with 4-pole, lockable Speaker sockets that are wired in parallel. You can
connect the input socket to the output on your power amplifier and tap into the signal from the amplifier on
the output connector, e.g. to feed this signal into an additional speaker system. For locking a connection turn
the plug to the right. For unlocking pull the unlock button and turn the plug to the left and pull it out of the
socket.
Connection Speaker socket
Information on installing audio cables
• A good cable run improves the sound quality remarkably. Avoid long cable runs.
• Always treat cables carefully and protect them from damages during transportation.
• Install cables always in a structured way and protect them from damage.
• Cables must be installed in a way that no person can stumble over them. Always fix cables with an
appropriate tape.
• Cables should be installed directly (no loops, S-shaped overlengths).
• Always install cables far away from power cables (never closely parallel).
• Never put heavy objects like speaker systems, flightcases etc. on cables.
• Never operate cables wound up.
INSTALLATION
The speaker system can be set up as desired. The location must be solid, plane, anti-slip, vibration-free,
oscilation-free, and fire-resistant. The installation area must hold a minimum point load of 5 times the
system's load (e.g. weight 20 kg - point load 100 kg). The speaker system must never be installed higher
than 100 cm without secondary attachment.
Information on transport
For transport, the speaker system features two carrying handles. The speaker system should be carried
without force by two persons of the same size. Carrying the speaker system as one person alone should be
avoided as the high weight and the strain could lead to back damages and torsions. Please note that all
speaker systems with more than 25 kg weight must be transported with two persons.
The subwoofer can be equipped with an optional wheel board for convenient transportation. Insert the
wheelboard into the butterfly-locks of the subwoofer. Rotate the handle to lock.
