Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
17
Chapter 2: Basic Checkout
Calibrating The Touchscreen
To install ActiveSync, follow the step-by-step instructions provided with the
program’s setup wizard. Refer to the following website for details:
http://www.microsoft.com/windowsmobile/resources/downloads/pocketpc/activesync35.mspx
2.4 Calibrating The Touchscreen
2.5 Resetting The WORKABOUT PRO Hand-Held
Important:
Because Psion Teklogix cannot guarantee what has been saved
(registry) after a reset, this should be considered as a last resort.
To reset the unit:
•
Press and hold down the <BLUE> key and the <ENTER/ON> key simulta-
neously for a minimum of six seconds.
A reset results in a complete reboot of the unit. All RAM memory contents are lost.
The contents of the flash memory and memory card may be preserved, but Psion
Teklogix cannot guarantee this.
Note:
You do not need to reset your WORKABOUT PRO after configuring the
radio.
