manualshive.com logo in svg

Psion Teklogix WORKABOUT PRO M/C, User Manual

Share
Download
Psion Teklogix WORKABOUT PRO M/C User Manual Download Page 182

Chapter 8: Peripheral Devices & Accessories
Automotive Adaptor

156

Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual

•

Insert the tether connector into the tether port on your hand-held. Tighten 
the screws to secure the cable in place.

•

Insert the DC power plug into the DC IN socket on the tether cable, and 
plug the pronged end of the power cable into an AC outlet.

8.9  Automotive Adaptor

Figure 8.17 Automotive Adaptor

The automotive adaptor is an optional accessory that allows you to power your 
WORKABOUT PRO through your vehicle cigarette lighter.

• Attach a tether cable (see 

Figure 8.16 

on page 155) to the base of the 

WORKABOUT PRO.

•

Insert the automotive adaptor DC power plug into the DC IN socket on the 
tether cable.

•

Insert the adaptor in your vehicle cigarette lighter outlet to power your unit.

DC Power Plug

Adaptor

Summary of Contents for WORKABOUT PRO M/C

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands