Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
83
Chapter 5: Configuration
The Property Tab
5.6.3 The Property Tab
Figure 5.27 Bluetooth Servers Tab
The
Property
tab displays information about your WORKABOUT PRO, and provides
some port options.
The Device Name field shows the device name of your WORKABOUT PRO. This
name can be changed (see the Note in this section for details).
Device Class shows the Class of Device (e.g. desktop, hand-held), which is always
set to Handheld.
Local Bluetooth Address shows the address of your WORKABOUT PRO radio.
Port Prefix is used to set the port name to either BSP or COM. When the name is
set to BSP, BSP2 to BSP9 are available for activated services (including the server).
When COM is chosen, COM7 to COM9 are available.
The Connection list table shows the Name, Address, and Type of the currently
active connections. The table is periodically updated while on display, but it can take
a few seconds before it reflects the actual list of connections. The Type column of
the table shows ‘ACL’ or ‘SCO’. The Connection list table shows the connections
for scanning as well as the service connections.
Note:
You can change the device-name and description of your radio by clicking
on the
System
icon in
Control Panel
, which will open the
System Properties
dia-
logue box. Click on the
Device Name
tab to access the menu and change your
settings. Then click on OK.
