manualshive.com logo in svg

Psion Teklogix Vehicle-Mount Computer 8515, User Manual

Share
Download
Psion Teklogix Vehicle-Mount Computer 8515 User Manual Download Page 86

Chapter  5: Configuration

Input Panel

60

Psion Teklogix 8515 Vehicle-Mount Computer User Manual

Figure 5.7  Backlight Tab

Intensity

This parameter is used to adjust the light intensity of the backlight. Sliding the bar to the left 
lowers the light intensity, and sliding it to the right raises the intensity.

Bright For

The value chosen from this dropdown menu determines the duration of time that the back-
light stays on at the configured intensity when a unit is not in use. 

Dim For

The value chosen from this dropdown menu determines the duration of time that the back-
light stays on at half the configured intensity (dimmed backlight) when a unit is not in use.

External Power Checkbox

When you select the checkbox next to 

‘When using external power keep the backlight 

always ON.

’, the backlight remains ON at the configured intensity. 

5.5.4   Input Panel 

The 8515 is equipped with at Soft Input Panel (SIP).

Note:

Backlight changes take effect immediately. You do not need to reset the 8515.

Summary of Contents for Vehicle-Mount Computer 8515































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands